INSTALLATION
7
Mount the Installation Brackets — Outside Mount
To attach the brackets, a flat vertical surface at least 1
3
/
4
" is required.
Mark End Bracket Locations
■
Mark where the ends of the headrail will be located.
➤
Center the headrail over the window opening at the desired height. Use a pencil to lightly
mark each end of the headrail.
➤
Alternatively, measure the width of the headrail and use that width to mark the headrail
end points over the window opening.
■
Mark
1
/
4
" to the outside of the headrail end marks. The outer
marks are where the outside edges of the end brackets
will be located.
Attach the End Brackets
■
Align the outside edge of each bracket with the outer marks and mark diagonal screw holes.
➤
Use a
3
/
32
" drill bit to drill holes for the mounting screws.
Important:
Use drywall anchors when mounting into drywall.
Mark
Mark
Measure and Mark
1
/
4
" Out from
Ends of Headrail
