INSTALLATION
6
Attach Intermediate Brackets (If Required)
■
Evenly space the intermediate bracket(s) between the two end brackets. A minimum depth
of 1
1
/
8
" is required for bracket attachment.
➤
Adjust spacing if needed to avoid interference with internal headrail mechanisms.
■
Attach the intermediate bracket(s) with two screws through diagonal top holes.
Important:
The rear of the end brackets and intermediate bracket(s) must align.
Use Bracket Shims (If Required)
Bracket shims are used to gain clearance for valance clips with inside mounts and ceiling
mounts. Shims are included with your order (one for each end bracket and two for each
intermediate bracket).
■
With each end bracket, first fold the shim and then position it on top of the bracket to gain
the required clearance.
■
With each intermediate bracket, stack two unfolded shims.
note:
Bracket shims may also be used whenever the mounting surface is uneven in order to
mount the blind level. The shims can be cut along their fold line to make them thinner.
Proceed to “Install the Blind” on page 10.
Intermediate
Bracket
End
Bracket
End
Bracket
Space Evenly
Space Evenly
One Shim
Folded Over
Two Shims
Stacked
End
Bracket
Intermediate
Bracket
