manualshive.com logo in svg

Hunter VSX, Руководство по эксплуатации

Поделиться
Скачать
Hunter VSX Скачать руководство пользователя страница 34

35

VSX OPERATING MANUAL

“SEQ”

 means the stations will run sequentially,

in the order in which they were entered. If you
press the TOGGLE button to capitalize 

“SIM”

,

all of the stations will begin simultaneously.
Use TOGGLE to capitalize the mode you want,
and press ENTER.

Note: Simultaneous starts are actually staggered
at one-second intervals to prevent simultaneous
inrush currents.

When stations begin running sequentially, the
display will show:

(where “xxx” is the number of the station

currently running, and “0:nn” is the amount

of time left to go on that station).

If you requested the stations to run simulta-
neously, the display will show:

(where “xxx” is the number of one of the

stations currently running, and “0:nn” is the

amount of time left to go on the station).

In the Simultaneous mode, the display will
sequence through all the stations currently running
and show the remaining time on each station.

Any automatic Program can be easily started at
any time from the keypad. This is called “semi-
automatic operation” and is useful for irrigat-
ing any area that is normally handled by an
automatic Program, right now. You can use this
to irrigate a fertilized area, or for frost or dew
control, or for any other purpose.

To semi-automatically start a Program: Press
PROGRAM SELECT until the Program you
want to start appears in the display. Press the
START button. The display will show:

Press START again. The Program will begin
running. It will irrigate the entire Program,
including all Cycles and Delays.

If you semi-automatically run an automatic
Program during the day, it will still run later at
its assigned automatic Start Time.

Semi-automatic Program
Operation

Содержание VSX
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды