19
VSX OPERATING MANUAL
Example:
A controller has a 14-day schedule. You want to
set up a Program to irrigate Monday and Thurs-
day of the first week, and Tuesday and Friday
of the second week. Monday is the first day
(“Day 1”) of the Schedule.
Use the NEXT button and the TOGGLE to create:
After the 7th day, press NEXT again, and the
display will advance to Days 8 through 14.
Continue to press NEXT and use TOGGLE to
configure the second week:
After you have set up the entire Daily Schedule
for the Program, press ENTER. The display
will show
“Enter to Save”.
Press ENTER
again. The display will briefly show
“SAVED!”
,
and then will return to the Program Name.
If you select Day of Week, the display will
show something like:
The Program number for the selected Program
will be displayed. DOW = will show which day of
the week today is. The S•M•T•W•T•F•S display
represents each day of the week. The cursor will
be under the day of the week that the controller
thinks it is (in the example above, Tuesday).
Capital letter days are watered. Lower-case
lettered days are non-water days.
Press the TOGGLE button to change the
capital
“T”
(or any other letter) to a lower-case
“t”.
Press TOGGLE again, and the day will
change back to a capital
“T”
. Press the NEXT
(or BACK) button to move to a different day.
Create capital letters for each day you want to
water, and lower-case letters for each day you
want to skip.
When the whole week is configured correctly,
press ENTER. The display will briefly show
“SAVED!”
, and then will return to the Schedule
days you have created.
Example: You want the Program to water all
weekdays, but not weekends. In DOW mode,
use the TOGGLE and NEXT buttons to create:
This shows that Sunday and Saturday will not
be water days, but that the rest of the days will
irrigate.
Press EXIT to leave the Schedule editing
mode. The display will show:
You must press the ENTER button with
YES
capitalized to save the new Program Schedule.
If you want to discard it, press the TOGGLE
button to capitalize
NO
and press ENTER, and
the Schedule will not be saved.
To change a Schedule which has already been set:
Press the PROGRAM SELECT button until the
Program you want to change appears in the
display.
