manualshive.com logo in svg

Hunter VSX, Руководство по эксплуатации

Поделиться
Скачать
Hunter VSX Скачать руководство пользователя страница 20

21

VSX OPERATING MANUAL

Programming Stations: Run Times,
Events, and Blocks.

A station is a single electrical output from the
field controller. In conventional systems, each
station is a specific screw terminal on the output
board. In decoder systems, each station is a
uniquely-numbered decoder output. The VSX
controller may have up to 60 stations, plus
separate Pump output (conventional), or 103
stations plus a Pump output in a decoder
system.

A run time is the length of time for which the
station will be activated, or in other words, how
long the sprinklers it controls will run. Each
station run time is separately programmed. Run
times may be programmed in 1-minute incre-
ments, from 1 minute to 18 hours, 12 minutes,
in hh:mm format.

A station may appear in more than one Pro-
gram, and it may appear in the same Program
more than once. Stations may run in any order,
and are not required to run sequentially.

The Event refers to the order in which the
station will run. You can run any station in any
order, by setting its Event number. Events
always occur in sequence, from #1 to the last
event. You can assign any station # to any Event #.
Each Program may have up to 30 Events.

To program individual stations:

Press the PROGRAM SELECT button repeat-
edly until the name or number of the Program
you want appears in the display. Once you have
pressed PROGRAM SELECT, you can also use
the BACK and NEXT buttons to go backward
or forward through the available Programs.

When the Program you want appears in the
display, press the STATIONS button. The
display will show:

(or actual numbers)

or

 9:30pm 

or

 9:30pm – 10:45pm

This first display shows the total time for the
Program selected, and the start and end times
for the Program. If it is a new Program, or the
Start Time has been cleared, the second line
will show 

“No Start Time”.

 If there is already

a Start Time, it will be shown. If Station Run
Times already exist, the Start and the end time
for the Program will be shown.

Press the STATIONS button again. The display
will show (example):

...or, if the station has never been programmed
before, as at initial installation, it will show:

This will show the station information for the
first “Event” in the Program. The Program

Содержание VSX
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды