25
VSX OPERATING MANUAL
station 7 to a Block, simply type “7” at a blank
spot and press ENTER. You may then advance
to the next blank spot and enter, change, or
remove more stations in the Block.
You may also replace one station in an existing
Block with another. Press NEXT to advance to
the station you want to replace, simply type the
new station number right over it, and press
ENTER. This will remove the original station,
and add the new station in its place.
When the Block editing is complete, press
ENTER again. The display will ask:
If you want to save the Block edits, press
ENTER (with the
YES
capitalized). The
display will show:
The display will then revert to the
Edit a Block?
option level.
To remove an existing Block, press the ENTER
button when
Remove a Block?
is shown. The
display will show:
In this example, the controller already has more
than 5 Blocks created, and the arrow symbol is
prompting you to press the NEXT button to
view more Block numbers.
Type the number of the Block you want to
remove (for example, “2”) and press ENTER.
The display will show
REMOVED
and the
block will be permanently deleted.
Station Options (changing Events):
As noted above, stations or Blocks can run in
any order. You do this by editing Events. There
are several options available to edit Events.
Remember: The Event refers to the order in
which the station will run. You can run any
station in any order, by setting its Event num-
ber. Events always occur in sequence, from #1
to the last event. You can assign any station # to
any Event #.
Events are part of a specific Program, so the
first step is to press PROGRAM SELECT on
the keypad until the Program you want to edit
appears in the display.
Then press the STATIONS button once. The
display will show the current total run time of
the Program. The easiest way to access most of
the functions for a specific event is to continue
pressing the STATIONS button until the dis-
play shows the Event you want to edit. When
the specific Event is shown in the display, press
the OPTIONS button.
The OPTIONS button will cycle through the
Station-level options, which are as follows:
