7
41473-01 12/6/2001
FLUSH MOUNTING
For Low Ceilings
1. Position the three rubber spacers over the
threaded holes in the motor adapter as shown in
Figure 4b
Figure 4c - Placing Canopy and
Washer Over Adapter
Assembly
Washer
Canopy
Adapter
Top of Fan
Figure 4e - Attaching Canopy to Fan
Assembly
Assembly
Washer
Adapter
Threaded
Hole
Figure 4d - Positioning Assembly
Washer Slots over Threaded Holes
4. Position the slots in the assembly washer over the
threaded holes in the adapter as shown in Figure 4c.
NOTE: Upon completing step 3, the slots in the as-
sembly washer, the rubber spacers and the threaded
holes in the adapter should be aligned.
Assembly Screw
and Lockwasher
5. Insert the three assembly screws and lockwashers
through the spacers and into the adapter.
6. Attach the canopy tightly to the fan assembly with
three assembly screws and lockwashers as shown in
Figure 4d.
2. Fit the canopy over the motor hanger adapter as
shown in Figure 4c. Make sure the canopy fits snugly
against the fan assembly with no space between the
pieces.
3. You will find a large assembly washer included with
the fan. Place the washer over the adapter and canopy
as shown in Figure 4d.
Figure 4b - Placing Rubber Spacers
Threaded
hole
Rubber
Spacer
Motor
Adapter
