10
45068-01 • 05/19/10 • Hunter Fan Company
5-1 . Partially install two canopy screws (about 2 full turns) in the
hanger bracket .
5-2 . Raise the canopy over the hanger bracket . Align partially installed
screws with key slots in canopy .
5-3 . Twist canopy clockwise to secure .
5-4 . Install third & fourth canopy screw in round hole on canopy .
Securely tighten all four screws .
5-5 . Using both hands, push the canopy trim ring up to the top of the
canopy .
5-6 . Twist canopy trim ring clockwise to secure the canopy .
Should you need to remove the canopy
trim ring, follow these steps:
1 . Twist canopy trim ring counter
clockwise until it releases from
canopy .
Steps 5-1 – 5-2
Canopy Trim
Ring
Canopy
Hanger Bracket
Step 5-3
Canopy
Screw
Step 5-4
Step 5-5
5 • Installing the Canopy and Canopy Trim Ring
