4
STOVE DIMENSIONS:
INSTALLING THE APPLIANCE
Pre-Installation Notes
1.
Check the stove data plate to establish the gas type required. The data plate
can be found on a chain at the top left rear corner of the stove.
Before installation check that the local distribution conditions, nature of the
gas and pressure, and adjustment of the application are compatible.
2.
A
GAS SAFE REGISTERED INSTALLER
or equally recognised competent
person must fit the appliance. That person is legally responsible for the safe
installation of the appliance with due regard to all relevant local and national
building regulations.
3.
All outer surfaces of the stove excepting the gas control knobs are defined as
working surfaces.
4.
Installation site
Any installation area previously used for a solid fuel fire or stove would
probably be deemed suitable for the appliance.
5. The stove
must not
be installed onto a combustible wall. Any combustible
materials must be removed from behind the appliance.
6. The appliance must be sited on a non-combustible hearth of minimum 12mm
thickness.
Diagram 1
