19
SERVICING INSTRUCTIONS
It must be understood that any recommendations made here are in addition to the
standard servicing procedures used by the servicing engineer.
1.
A GAS SAFE registered fitter using only original HS GAS parts should carry
out servicing.
2.
Remove the stove body and glass as described on Page 7 (Removing the Stove
Body).
3.
Carefully lift-off the ceramic coals/logs and remove the 3 ceramic matrices.
4.
Using a soft brush, clean away any lint or light carbon soot deposits out of the
gas ports on the burner top plate.
5.
Check the TTB Bracket inside the draught diverter for blockage and clean as
necessary.
6.
Replace the ceramic matrices and loose coals/logs as per the arrangement
instructions (Page 10- Fire-bed Arrangement) using all re-serviceable
ceramics and any new replacements. Replace the glass and stove body as
described on Page 16 (Re-assembling the Stove).
7.
Check the gas operating pressure and pipe work for soundness, carry out a
spillage test and check the condition of the flue system.
