Hunter Stoves AVALON 4 Series, Инструкции по установке/эксплуатации/обслуживанию/сервисному обслуживанию

Страница: 18 / 28

18
To adjust the flame, hold handset to activate buttons, and use + and – to increase
or decrease flame power accordingly. Tapping the button will increase or decrease
flame stepwise, holding the button will skip through steps. The fire basket display
on the handset will illustrate the level of flame being produced.
To STOP the fire, hold handset to activate buttons, then press the power button.
The fire should shut off immediately (n.b. residual heat will remain). If you wish to
start the fire again you must wait for OFF to be displayed on the handset before
trying to re-start.
NOTE: THE HANDSET IS DESIGNED TO MAKE REMOTE OPERATION OF THE FIRE AS SAFE AS POSSIBLE. IT HAS
BEEN SPECIFICALLY DESIGNED TO MINIMIZE THE RISKS OF ACCIDENTAL OPERATION, WITH THE EXPRESS
INTENTION THAT SUCCESSFUL OPERATION CAN ONLY BE ACHIEVED BY A CONSCIOUS, DELIBERATE ACT. ERGO IT
MAY TAKE SOME TIME TO BECOME FAMILIAR WITH THE INTRICACIES OF HANDSET OPERATION.
TIME, DATE AND TEMPERATURE
1) Hold the handset in one hand ensuring your hand is wrapped around the back and that your hand
comes into contact with both sides of the
handset. The green “unlock” light should light, and the
screen will be as shown below.
2) The “H” symbol as shown below indicates that the timer can be set to either 24hr or 12hr mode.
Press the + or – buttons on the handset to move between the two settings.
3) When you have chosen your display, option confirm by pressing the SET button on the handset.
4) Press and release the + and – buttons on the handset until the correct day of the week is shown then
press SET.
5) As shown above the time on the handset can be set by using the + and – buttons to change the hour
and then press SET. Repeat to set the minute (+ and -) then SET to store.
Green unlock symbol
24hr or 12hr display
Day of the week
Hour and Minute display
Set button