Assembly Steps
4. Steering Wheel assembly
5. Mirror assembly
6. Connect the power supply
●
Insert the tabs on the mirror into the slot
located at the front of the vehicle body.
●
Push until you hear this click into place;
Repeat for the other side.
●
Plug the wire connector into the motor
connector.
●
Plug the power connector into the
terminal on battery as shown.
Wire
connector
Power
connector
Fuse box
Motor
connector
●
Remove the M5x35 machine screw with
a screwdriver
●
Insert the steering wheel onto end of
the steering shaft, line up the holes in the
steering wheel and the holes in steering
shaft, insert the M5x35 machine screw
and
Ø
5 nut back in the same location and
tighten it with a screwdriver.
Ø5 nut
M5x35
machine screw
Steering wheel
Mirror
PLEASE NOTE: IN CASE OF PRODUCT FAULT DO NOT RETURN THIS PRODUCT TO STORE. PLEASE
CONTACT HUNTER PRODCUTS CUSTOMER SERVICE TOLL FREE NUMBER: 1800 224 094
OR VISIT WWW.ELECTRICRIDEON.COM.AU
-7-