4-1
4-2
4-3
4-1
Assembly Steps
3. Steering Shaft assembly
Ø10nut
Ø10nut
Ø10nut
Split pin
Split pin
Steering shaft
●
Turn the vehicle on its side.
●
Slide a
Ø
10 washer *1 onto the steering shaft from the straight end(PIC4-1).
●
Insert the straight end of steering shaft through the hole in the vehicle body and out through the hole in the
dashboard.
●
Insert the bent end into the hole in the front axle, secure it with split pins *1 and
Ø
10 washers *1(PIC4-2,4-3)
●
Turn the vehicle on its side.
●
Insert the straight end of steering shaft through the hole in the vehicle body. And make the steering shaft
match to the steering gear box(PIC4-1).
●
Insert the bent end into the hole in the front axle, secure it with split pins *1 and
Ø
10 washers *1(PIC4-2,4-3)
Match to the
steering gear
box
PLEASE NOTE: IN CASE OF PRODUCT FAULT DO NOT RETURN THIS PRODUCT TO STORE. PLEASE
CONTACT HUNTER PRODCUTS CUSTOMER SERVICE TOLL FREE NUMBER: 1800 224 094
OR VISIT WWW.ELECTRICRIDEON.COM.AU
-6-
