Assembly Steps
•
Your new vehicle requires adult assembly. Please set aside at least 40 minutes for
assembly. Children can be harmed by small parts, sharp edges and sharp points in the
vehicle's unassembled state. Care should be taken in unpacking and assembly of the
vehicle. Children should not handle parts, or help in assembly of the vehicle.
•
Please identify all parts before assembly and save all packaging material until assembly
is complete to ensure that no parts are discarded.
•
Assembly tool for need: screwdriver(not included), pliers(not included), hammer(not
included), spanner.
1. Driving Wheel assembly
2.Wheel assembly
Gear box
Inner bush
Inner bush
Drivng wheel
Wheel
Outer
bush
Outer
bush
Ø10 washer
Ø10 washer
Ø10
washer
Ø
10
cap nut
Ø
10
cap nut
Wheel
cover
Wheel
cover
●
Slide a inner bush onto the rear axle.
●
Slide the gear box onto the rear axle
from the left side of vehicle body(standing
at rear of vehicle).
●
Slide the driving wheel on to rear axle,
make it match to the gear box.
●
Slide a
outer bush onto the rear axle.
●
Slide a
Ø
10 washer.
●
Fit a
Ø
10 cap nut with a hammer.
●
Insert the wheel cover.
●
Slide a
Ø
10 washer onto the front axle
●
Slide a inner bush onto the front axle.
●
Slide a wheel onto the front axle(the
bush should match to the wheel).
●
Slide a outer bush onto the front axle.
●
Slide
Ø
10 washer*1 onto the front axle.
●
Fit a
Ø
10 cap nut with a hammer.
●
Insert the wheel cover.
NOTE: REMEMBER TO FOLLOW THE
SAME STEPS FOR OTHER TWO
WHEELS.
PLEASE NOTE: IN CASE OF PRODUCT FAULT DO NOT RETURN THIS PRODUCT TO STORE. PLEASE
CONTACT HUNTER PRODCUTS CUSTOMER SERVICE TOLL FREE NUMBER: 1800 224 094
OR VISIT WWW.ELECTRICRIDEON.COM.AU
-5-
