Speed Dome Camera Instruction Manual
32/41
Alarm Input Setup
ALARM INPUT SETUP
------------------------
ALARM NO. 1
TYPE N.OPEN
ACTION NOT USED
HOLD TIME ENDLESS
POST ACTION HOME
BACK
EXIT
Sets alarm function.
z
Alarm No
[1~4]
Selects a sensor number to set up.
z
Type
[Normal OPEN/Normal CLOSE]
Sets sensor operation type.
z
Action
[NOT USED/PRESET/PATTERN/SWING/GROUP]
Sets actions to run when sensor is input.
z
Hold Time
[ENDLESS/1~59 sec/1~180 minute]
Sets the time period for the action which is run
by external sensor activation. After the time
period passes, the action pre-defined in
“
Post
Action
”
runs sequentially in succession to the
action by external sensor activation. If this option
is set to
“
ENDLESS
”
,
“
Post Action
”
does not
activate.
z
Post Action
[HOME/PRESET/PATTERN/SWING/GROUP/PREV
ACTION]
Sets the action that a camera should run after the
time period in
“
HOLD TIME
”
passes
HOW TO USE OSD MENU
4
