Speed Dome Camera Instruction Manual
10/41
Communication Protocol Setup
1
2
3
4
ON
ON
NTSC/PAL (Reserved for Supplier)
1
2
3
4
ON
ON
z
Select the appropriate Protocol with DIP switch combination.
Switch State
P0
(Pin 1)
P1
(Pin 2)
Protocol
OFF
OFF
PELCO-D, 2400 bps
ON
OFF
PELCO-D, 9600 bps
OFF
ON
PELCO-P, 4800 bps
ON
ON
PELCO-P, 9600 bps
z
If you want to control using DVR or P/T controller, their protocol must
be identical to camera. Otherwise, you can not control the camera.
z
If you changed camera protocol by changing DIP S/W, the change
will be effective after you reboot the camera.
z
Factory default of protocol is “Pelco-D, 2400 bps”.
z
Since Pin 3 is only for supplier, DO NOT CHANGE THESE ITS
ORIGINAL STATE
.
If you change one of these, proper operation can
not be achieved.
~
Pin 3
PAL / NTSC system selection of Camera. DO NOT
CHANGE THIS PIN.
INSTALLATION
2
