Speed Dome Camera Instruction Manual
19/41
Preset
z
Function
Max. 127 positions can be stored as Preset position. The Preset number can be assigned
from 1 to 128, but 95 is reserved for starting OSD menu.
Camera characteristics (i.e. White Balance, Auto Exposure) can be set up independently
for each preset. Label should be blank and "Camera Adjust" should be set to "GLOBAL" as
default. All characteristics can be set up in OSD menu.
z
Set Preset
<Set Preset> [1~128]
z
Run Preset
<Go Preset> [1~128]
z
Delete Preset
To delete Preset, use OSD menu.
Swing
z
Function
By using Swing function, you can make camera to move between 2 Preset positions
repeatedly. When swing function runs, camera moves from the preset assigned as the 1st
point to the preset assigned as the 2nd point in CW(Clockwise) direction. Then camera
moves from the preset assigned as the 2nd point to the preset assigned as the 1st point in
CCW(Counterclockwise) direction.
In case that the preset assigned as the 1st point is same as the preset assigned as the 2nd
point, camera turns on its axis by 360
°
in CW(Clockwise) direction and then it turns on its
axis by 360
°
in CCW(Counterclockwise) direction.
Speed can be set up from 1
°
/sec to 180
°
/sec.
z
Set Swing
To set Swing, use OSD menu.
z
Run Swing
Method 1) <Run Pattern> [Swing NO.+10]
Method 2) <Go Preset> [Swing NO.+140]
ex) Run Swing 3 : <Run Pattern> [13]
ex) Run Swing 3 : <Go Preset> [143]
z
Delete Swing
To delete Swing, use OSD menu.
1st Preset
2nd Preset
1
CW
Di
rec
tio
n
2
CC
W
Dir
ec
tio
n
OPERATION
3
