Speed Dome Camera Instruction Manual
11/33
Main Part Description
DIP Switch
IP Reset Switch
LAN Port
Audio Port
Main Connector
Dome Cover
Mounting Screw Hole
Drop Prevention Spring
BNC Connector
z
Dome Cover
Do not detach the protection vinyl from the dome cover before
finishing all the installation process to protect the dome cover from
scratches or dust.
z
DIP Switch
Used to set up camera IDs and protocols.
z
Drop Prevention
Spring
This part keeps the camera from dropping during installation and
maintenance. After install the Bracket, please, hang the spring to
the drop prevention hook of main body as shown in picture for
further tasks.
z
Mounting Screw Hole Used to assemble the main body with a bracket with screws.
z
Main
Connector
Used for the power wire, sensor in/out and the RS-485
communication cable connection.
z
BNC Connector
Used for video signal connection.
z
LAN Port
Used for Ethernet connection.
z
Audio Port
Used for audio in/out connection.
z
IP Reset Switch
Used to initialize all network configurations to the factory default.
Press the button for more than 5 seconds to initilze the network
configurations.
INTRODUCTION
1
