Hunt Electronic HVRM-S400E, Руководство по установке

Страница: 7 / 57

7
1.3. Unpacking
Check the package for visible damage. If any items appear to have been damaged in shipment, notify the
shipping company. Unpack carefully. This is electronic equipment and should be handled with care to prevent
damage to the unit. Do not attempt to use the unit if any components are damaged. If any items are missing,
notify your Customer Service Representative or HUNT ELECTRONIC USA INC. Sales Representative.
The shipping carton is the safest container in which to transport the unit. Save it and all packing materials for
future use. If the unit must be returned, use the original packing materials.
1.3.1. Package contents
Check for the following items:
z Digital Video Recorder.
z HVRM-S400E Installation Guide
z 12V DC Adaptor with AC cord.
z
A CD-ROM with the software and the manuals.
z LAN Cable (Cross)
2. Installation
To install the HVRM-S400E make the connections described below and then enter the relevant data in the
quick setup menu.
2.1. Connections
Primary connections
1. Connect the cameras to the BNC camera input connectors.
- The HVRM-S400E sets video signal’s impedance (75 Ω ) automatically
Impedance is set as 75 Ω basically. If connecting a device to video output, impedance will be “Hi-z” status.
- The HVRM-S400E automatically configures itself as a PAL or NTSC unit by detecting the signal format of the first
connected
camera (lowest camera input number)
2. Connect a monitor to the BNC output MON Out.
- Connect the unit to the monitor using 75-ohm video coaxial cables with BNC connectors.
Optional connections
3. Connect up to four audio inputs via the RCA connectors.
4. Connect an audio output device via the RCA connectors.
5. Connect up to four (alarm) inputs via the terminal connector.