Hunt Electronic HVRM-S400E, Руководство по установке

Страница: 28 / 57

28
• Set Auto-Detect to On to allow the Remote viewer software to automatically detect the
HVRM-S400E in a network.
• Set the Bandwidth limit throttle to restrict the network bandwidth used.
>>>
X
DSL
•
Specify the Username and Password for an xDSL connection if required
• When connected, the status shows Connected.
>>> PORT
• The HVRM-S400E provides flexible network communication port configuration. If the HVRM-S400E is on
a special network, the network port can be changed to the appropriate number. For network communication
port information, ask your network administrator.
• The default is 80.
>>> COM PORT
• Configure the single RS-232 serial port for use with either a text device.
• Select Device with the up/down keys.
• Select appropriate values for serial communication for Baud rate, Parity, Stop bits and Data bits.
>>> E-MAIL SETUP
The HVRM-S400E can send an e-mail on a specified event.
• If Status is set to On, an e-mail is sent to the specified address on an input alarm,
video loss or system failure.
• Specify a recipient address and an sender address.