Hunt Electronic HVRM-S400E, Руководство по установке

Страница: 23 / 57

23
>>> RECORDING RESOLUTION
• Set recording resolution of all cameras [CIF /Half D1/ Full D1].
• [Limitation] ‘Recording Resolution’
Max - IPS 15
(frame/sec)
NTSC
Max - Pre-event Rec 15
(sec)
Max - IPS 12.5
(frame/sec)
Half D1
PAL
Max - Pre-event Rec 15
(sec)
Max - IPS 7.5
(frame/sec)
NTSC
Max - Pre-event Rec 10
(sec)
Max - IPS 6
(frame/sec)
Full D1
PAL
Max - Pre-event Rec 10
(sec)
>> RECORDING
• Set the normal recording rate and quality to be used for all cameras.
[Limitation] Make reference to the ‘Recording Resolution’
• Set the recording rate and quality that are used when an input alarm is triggered. All
cameras then record at these values when an input alarm is triggered.
• For each camera separately, set the conditions for recording:
• Always - camera is always recorded at the set recording rate and quality.
• Motion only - camera is recorded at the normal rate and quality only when motion is
detected (no images are recorded when there is no motion).
• auto snapshot - camera is recorded at the normal rate and quality when
motion is detected. The rest of the time a snapshot of the camera picture is recorded
(I-frame images only).
• Event Recording time can be configured to a maximum of 120 seconds or to follow the
event duration.
• Pre-event recording time can be configured to a maximum of 30 seconds. Pre-event
recording takes place:
[Limitation] Make reference to the ‘Recording Resolution’
a. on an alarm input if the normal recording rate is 0 IPS,
b. on a motion event (if a motion mode is selected).