STEP 1
Unlock the swing arm by pulling on the quick
release lever located above the crankset. Slightly lift
the bike up as the swing arm starts to pivot and
bring it under the frame.
Folding & unfolding
Hummingbird
Hummingbird has a revolutionary folding system that takes less than 5 seconds.
Watch our video guide following this link: bit.ly/HummFold
(NOTE: To unfold Hummingbird please follow steps 1 to 4 in reverse order)
STEP 2
Unlock the stem by clicking the safety pin and pull
on the lever. Start tilting the handlebars and tuck
them under the swing arm.
STEP 3
Open the seatpost clamp and drop the seatpost all
the way down. Quick release pedals can be
detached and slotted into the brake bridge.
STEP 4
For a more compact fold you can attach the front
wheel to the swingarm. To do so, open the front
quick release axle and the brake caliper quick
release to increase the tyre clearance. Pull the front
wheel out and clamp it on the dropout extension
located on the swing arm. Tighten quick release
until wheel is secure. Put seatpost in the gap
between stem and rear wheel.
8
