CHARGING HUMMINGBIRD ELECTRIC
To charge Electric Hummingbird, simply remove the protection cap from the charging connector
(I) and plug in the Zehus charger (2). Then connect the Zehus charger to a power outlet
(110~240 V).
The charging time is approximately 3 hours for a complete charge. While Hummingbird Electric is
charging the charger LED must turn RED. When Hummingbird Electric is completely charged, the
charger LED turns GREEN (3).
NOTE: when the charger get disconnected from the bike, Hummingbird Electric will turn off.
CHANGING GEARS
Although Hummingbird Electric is intended to be used as a single spee hub, you can decide to change
the sprocket or the crankset. If you change one or more of these components by yourself, BIKE
all in one performances could be not optimal. Please contact a retailer in order to update your
bike firmware with your new gear set.
Whenever you change tire size (e.g from 700x23c to 700x35c), please contact the retailer to
update your bike firmware. Otherwise the dislpayed speed could not be correct.
CAREFUL HANDLING
Please observe the operating storage temperature of Hummingbird Electric. Protect the charging
connector from impacts that can damage it. The components can be damaged if ex-posed to
extreme temperatures.
CAUTION: ALWAYS seal the connector on Hummingbird Electric with the proper protection cap
(5) before riding. Using Hummingbird Electric without the protection cap will void the warranty.
24
