Adj
1.
2.
3. Route the cables and pod shaft up through the trolling motor bracket.
4. Use an Allen wrench to install the (2) 10-32 x 9/16" socket bolts on the
bracket where the pod shaft is installed.
5. Tighten the bolts so the pod shaft is fully secure and won’t drop when it is
deployed in the next step.
Hand-tighten only!
Routing the Cables and Pod Shaft
pod shaft
socket bolt holes
bracket
18
AS 360 TM Ultrex
TM_360_Ultrex_IG_532178-2EN_A.qxp_30895_Eng_531478 2/16/17 5:33 PM Page 18
