Humminbird CannonLink, Руководство пользователя

Страница: 45 / 59

Park Single
Park Single allows you to park (raise) a single
downrigger, or, if the downrigger is linked to other downriggers, to raise the
linked set of downriggers. Once you perform this procedure, the selected
downrigger, as well as any downriggers linked to it, will begin moving. For more
information, see
Downrigger View .
CAUTION: Moving all of the downriggers at once can cause tangled lines. It is
recommended that you have one person tend each line/downrigger when you make
significant depth changes.
To park a single downrigger:
1. Highlight Park Single on the Downrigger X-Press™ menu.
2. Use the RIGHT 4-Way Cursor Control key to display the Downrigger
submenu, then use the UP and DOWN 4-Way Cursor Control keys to
highlight the number of the downrigger you want to park, and the
RIGHT 4-Way Cursor Control key to select the downrigger.
Upper Range
(Chartplotters only)
Upper Range sets the top of the depth range that
will be displayed on the screen, so that you can see the relevant portion of the
depth range. The Upper Range menu choice is only available with chartplotters.
Upper Range is often used with Lower Range.
To adjust the Upper Range:
1. Highlight Upper Range on the Downrigger X-Press™ Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or
decrease the Upper Range setting. (0 to 400 feet or 0 to 120 meters
[International Models only] , Default = 0)
For example, if you are only interested in the area between 20 and 50 feet deep,
you should set the Upper Depth Range to 20 and the Lower Depth Range to 50.
The Downrigger View will then show the 30 foot area between 20 and 50, and
will show greater detail for that area between 20 and 50 feet.
41