Humminbird CannonLink, Руководство пользователя

Страница: 39 / 59

Making Changes
Once the downriggers are set up and activated, there are two ways to make
changes: the Edit Downrigger submenu and the Downrigger View. While the
downriggers are active (lowered, or sent to depth), any changes made in the Edit
Downrigger submenu and saved will take effect immediately. No downriggers
will adjust until the changes on the tab are saved.
On the Downrigger View itself, with the downriggers active, highlighting each
downrigger number shows a new set of icons to the left of the water column.
• When a downrigger (or linked set of downriggers) is highlighted, pressing
the UP or DOWN 4-WAY Cursor Control key will change the set depth of the
downrigger(s). In Manual mode, this changes the Depth setting. In Cycle
mode, this changes both the Upper and Lower Limit settings so that they
are still the same distance apart, but they are now at a shallower or lower
depth. In Bottom Track mode, this changes the Offset value. The new
settings can be seen beside the Mode Indicator Icons.
To change the mode, cycle bracket size, and other settings, you must make
changes in the Edit Downrigger submenu. All of these changes can be made
while the downriggers are active, and they will take effect once the change is
made and saved.
35