Humminbird 768 combo Скачать руководство пользователя

Страница: 110 / 194

Waypoint [Name]

(Most recently-created waypoint)

Waypoint [Name]

allows you to view the waypoints submenu for the most

recently created waypoint.

NOTE:

You must have pressed the MARK key at least once since you last powered up

the Fishing System for this menu option to appear.

To view the Waypoint [Name] Submenu:

1. Use the 4-WAY Cursor Control key to move the cursor to a position on

the screen, and press the MARK key once to save a waypoint.

2. Highlight Waypoint[Name] on the Navigation X-Press™ Menu.

3. Press the RIGHT Cursor key to view the Waypoints submenu.

NOTE:

See

Navigation Menu Tab

for more Waypoints information.

The Waypoint Submenu contains the following menu options:

Edit

allows you to edit the Name, Position (Latitude and Longitude) and select

the Icon that will be used to represent the waypoint in the Chart and Combo
Views.

Delete

allows you to delete a waypoint from the saved waypoints list.

Go To

allows you to select a waypoint and start navigation toward that

waypoint, or add that waypoint to the end of the current route.

Target

allows you to apply a target to a waypoint selected from the saved

waypoints list.

Grid

allows you to apply a trolling grid to a waypoint selected from the saved

waypoints list.

Waypoint [Name] Submenu

Navigation X-Press™ Menu

Содержание 768 combo



































































































































































































Результаты поиска

Содержание 768 combo

Отзывы:

Похожие инструкции для 768 combo

Бренды по названию

Популярные бренды

Humminbird 768 combo, Руководство по эксплуатации

Результаты поиска

Содержание 768 combo

Отзывы:

Похожие инструкции для 768 combo

Бренды по названию

Популярные бренды