Humminbird 587ci Combo Скачать руководство пользователя страница 50

Страница: 50 / 143

MARK Key

Press the MARK key while in any view to mark the position of a
waypoint. The MARK key function works if you have the GPS

receiver connected. The waypoint location and characteristics are influenced by
the active features on the control head as follows:

•

If the cursor is active,

the waypoint will be marked at the cursor

location.

•

If the cursor is not active,

the waypoint will be marked at the boat

location.

GOTO Key

The GOTO key has multiple functions, depending on the situation:

•

If the Cursor is active

, press the GOTO key while in any view to create

a waypoint and start navigation towards that waypoint.

•

If the

Cursor is not active

, press the GOTO key to display the saved

waypoints list, and then highlight a waypoint. Press the RIGHT Cursor
key to begin navigation.

ZOOM (+/-) Key

The ZOOM (+/-) key has multiple functions, depending on
the situation:

• In any of the

Navigation Views or the Sonar Zoom View

, press the +/-

Zoom key to change the scale of the view to appear closer or farther
away.

Key Functions

Содержание 587ci Combo
















































































































































Результаты поиска

Содержание 587ci Combo

Отзывы:

Похожие инструкции для 587ci Combo

Бренды по названию

Популярные бренды

Humminbird 587ci Combo, Руководство по эксплуатации

Результаты поиска

Содержание 587ci Combo

Отзывы:

Похожие инструкции для 587ci Combo

Бренды по названию

Популярные бренды