1
Introduction
Introduction
This manual will guide you through the following installation requirements for the
MEGA Live Imaging transducer:
• Installing the Transducer
• Connecting to the Control Head and Power
• Testing the Installation
• Powering Off
Before proceeding with this installation, the Humminbird control head
and Minn Kota trolling motor should be installed. The MEGA Live
Imaging transducer can be connected directly to the control head or to a
Humminbird Ethernet Switch (optional, separate purchase required) for
networking. See the Ethernet Switch installation instructions to install
the Ethernet Switch.
Compatibility
Control Heads:
MEGA Live Imaging is compatible with all APEX™ Series and
SOLIX® Series fish finders, HELIX® Series G3N and G4N fish finders equipped with
MEGA , and HELIX 7 G4N fish finders with MEGA Down Imaging or
MEGA Side Imaging. It can be mounted on all Minn Kota Ultrex trolling motors and
on Minn Kota Fortrex trolling motors with built-in MEGA DI.
Minn Kota Trolling Motor
Humminbird Fish Finder
Minn Kota Ultrex (all models)
Minn Kota Fortrex (Built-In MEGA
DI models only)
APEX Series:
All models
SOLIX Series:
All models
HELIX Series:
HELIX G3N and G4N models
with MEGA and HELIX 7 G4N models
with MDI or MSI
NOTE:
You must have a GPS heading sensor (compass) installed in order to use the
MEGA Live Imaging navigation features.
