Humminbird 363 Скачать руководство пользователя страница 38

Страница: 38 / 57

To change the Map Borders setting:

1. Highlight Map Borders on the Chart main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Map Borders

setting. (Hidden, MMC/SD Only, All Visible, Default = Hidden)

Lat/Lon Grid

allows you to display or hide a grid

showing latitude and longitude lines.

To change the Lat/Lon Grid setting:

1. Highlight Lat/Lon Grid on the Chart main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Lat/Lon Grid

setting. (Hidden, Visible, Default = Hidden)

Set Simulation Position

(Advanced)

Set Simulation Position

allows you to set the position of the boat used in the Simulator.

The Set Simulation Position menu choice is only available when User Mode is set to
Advanced (see

Setup Menu Tab: User Mode

To set the Simulation Position:

1. Activate the cursor and move it to the coordinates from where you want the

simulation to start.

NOTE:

The cursor must be active in order for this procedure to work.

2. Make sure you are in Advanced User Mode, then highlight Set Simulation

Position on the Chart main menu.

3. Use the RIGHT 4-WAY Cursor Control key to change the Simulation Position

setting. A confirmation dialog box will appear to allow you to change your
mind, or to confirm your choice. If the cursor was not active before you
began this procedure, you will see an error message. Exit the menu, set the
cursor, then try again.

Chart Detail Level

allows you to select how much chart

detail you want displayed on the Navigation Views.

Basic

shows land areas, ports,

obstructions and restricted areas.

Navigation

shows navaids, landmarks, ferryways and

navigation routes in addition to the Basic information.

Underwater

shows depth

contours, fishing areas, underwater wrecks, tides and currents in addition to the Basic
and Navigation information.

All

shows roads, buildings, railways, and other notations

in addition to the Basic, Navigation and Underwater information.

To change the Chart Detail Level setting:

1. Highlight Chart Detail Level on the Chart main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Chart Detail

Level setting. (Basic, Navigation, Underwater, All, Default = All)

NOTE:

Some chart details are only available with optional-purchase MMC/SD cards.

Map Borders

allows you to display or hide map

borders. A Map Border indicates an area which contains a different map.

Map Borders

Map Borders

531448-1_A - 363_Man_Eng.qxd 11/9/2005 6:07 PM Page 74

Содержание 363


























































Результаты поиска

Содержание 363

Отзывы:

Похожие инструкции для 363

Бренды по названию

Популярные бренды

Humminbird 363, Руководство по эксплуатации

Результаты поиска

Содержание 363

Отзывы:

Похожие инструкции для 363

Бренды по названию

Популярные бренды