Humminbird 363 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 57

background image

56

Water Type

(Advanced)

Water Type

configures your unit for operation in fresh or salt water. The Water Type

menu choice is available when User Mode is set to Advanced (see

Setup Menu Tab:

User Mode

).

NOTE:

In salt water, what would be considered a large fish might be 2 to 10 times bigger

than a large fish in fresh water (depending on the type of fish you are seeking). The salt
water setting allows for a greater range in fish size adjustment to account for this. Also,
make sure that the Water Type is set accurately, especially in salt water, as this affects the
accuracy of deep water depth readings.

To change the Water Type setting:

1. Make sure you are in Advanced User Mode, then highlight Water Type on the

Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Water Type

setting. (Fresh, Salt, Default = Fresh)

55

Noise Filter

(Advanced)

Noise Filter

adjusts the sonar Noise Filter to limit interference on the display from

sources such as your boat engine, turbulence, or other sonar devices. The Noise
Filter menu choice is available when User Mode is set to Advanced (see

Setup Menu

Tab: User Mode

).

NOTE:

The Off setting removes all filtering; Low, Medium and High settings add progressive

filtering of the sonar returns. In some deep water situations, the High setting may actually
hinder your unit’s ability to find the bottom.

To change the Noise Filter setting:

1. Make sure you are in Advanced User Mode, then highlight Noise Filter on the

Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Noise Filter

setting. (Off, Low, Medium, High1, High2, High3, Default = Low)

Max Depth

(Advanced)

Max Depth

adjusts the maximum depth of operation. The performance of your 300

Series

TM

Fishing System can be tuned to the maximum depth you will be fishing in by

setting the Max Depth. When a maximum depth is set, your 300 Series

TM

Fishing System

will not attempt to acquire sonar data below that depth, thus increasing overall
performance. When Max Depth is set to Auto, the 300 Series

TM

Fishing System will

acquire bottom readings as needed (within the capacity of the unit). If the bottom is
deeper than the Max Depth setting, the digital depth readout will flash, indicating that
the 300 Series

TM

Fishing System cannot locate the bottom. The Max Depth menu choice

is available when User Mode is set to Advanced (see

Setup Menu Tab: User Mode

).

To change the Max Depth setting:

1. Make sure you are in Advanced User Mode, then highlight Max Depth on the

Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Max Depth

setting. (AUTO, 10 to 1000 feet, 3 to 330 meters

[International Models only]

,

Default = AUTO)

531448-1_A - 363_Man_Eng.qxd 11/9/2005 6:07 PM Page 62

«
...
30
31
32
33
34
...
»

Содержание 363


























































Отзывы:

Нет отзывов

Похожие инструкции для 363

Бренд: T&D Страницы: 2

Бренд: COBAN GROUP Страницы: 9

Бренд: FEIYUTECH Страницы: 8

Бренд: Racelogic Страницы: 6

Бренд: RPC Electronics Страницы: 33

ECHOMAP UHD2 6 SV

Бренд: Garmin Страницы: 14

Бренд: Chinavision Страницы: 14

Бренд: Garmin Страницы: 80

Бренд: Fullpower Страницы: 31

Бренд: Trackunit Страницы: 4

Бренд: INTELINK Страницы: 11

HawkEye 7200A-BB2327

Бренд: Blue Sky Network Страницы: 27

Бренд: Flex Страницы: 3

Бренд: SEPTENTRIO Страницы: 84

Бренд: SONASONIC Страницы: 10

StarFinder-Aire

Бренд: Laipac Страницы: 22

Бренд: MobileHelp Страницы: 12

Бренд: Kannad Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды