Humidex
15
As soon as the wire has been run
through the home, the controller can be
connected. To do so, open the control
by unscrewing the bottom screw, align
the control at the chosen location (with
the wire coming in) and mount it to the
wall with the screws provided
With the control mounted on the wall,
the wires must then be stripped and
connected following this guide:
Yellow Wire – B
Green Wire – A
Black Wire – GND
Red Wire – VCC
Once the wires have been connected,
the control can be closed and the screw
tightened.
This connection must then be repeated in
order to link the main exhaust unit. Wire
the green connector following the same
wire order as the control unit.
