Humidex
13
Fasten the unit to the wall
With the help of a tie wrap attach the flex pipe
to the collar on the back of the unit before
attaching the unit to the wall. Insert the other
end of the flex pipe inside the hole in the wall.
(a few Small 9/16” Screw can be used to affix
the flex to the mount)
Leaving a 1-inch gap between the top of the
unit and the ceiling, drill ¼” pilot holes
through the lips of the unit and the wall.
Apply the four plastics anchors on the wall with the help of a hammer.
Secure the HCS-BS or HCS-CS Unit to the wall using the four 1 ¼ inch screws
provided.
