Torch
The telephone has a torch function. To turn
this on, hold the
key down for around
3 seconds.
Follow the same procedure to turn the func-
tion off again.
Set Date / Time (HS)
Setting the time
1. Press the “Menu” key and select the
entry “HS Settings” with .
2. Now press “Select”.
3. Select “Date & Time” and confirm with
“Select”.
4. Select “Set Time” and confirm with “Se
-
lect”.
5. Enter the time over the selector key and
press “Save” to complete the setting.
Setting the date
1. Press the “Menu” key and select the
entry “HS Settings” with .
2. Now press “Select”.
3. Select “Date & Time” and confirm with
“Select”.
4. Select “Set Date” and confirm with “Se
-
lect”.
5. Enter the date over the numerical keys
and press “Save” to complete the setting.
Set Time Format
1. Press the “Menu” key and select the
entry “HS Settings” with .
2. Now press “Select”.
3. Select “Time Format” and confirm with
“Select”.
4. With chose from 12-hour and 24-hour
and press “Save” to complete the setting.
Setting the Date Format
1. Press the “Menu” key and select the
entry “HS Settings” with .
2. Now press “Select”.
3. Select “Date Format” and confirm with
“Select”.
4. With chose from DD-MM and MM-DD
and press “Save” to complete the setting.
Additional functions (HS)
Registering a new handset
The handset which was delivered is alrea-
dy registered on the base. This is registered
as handset 1. Each additional handset that
you purchase must first be registered on the
base station.
Up to 5 base stations can be registered on a
base station. You can then also make inter-
nal telephone calls between the handsets.
You can also forward incoming calls to other
handsets.
You can register up to 4 base stations on
each handset. This increases the range of
the telephone so that you can move bet-
ween the telephone transmission areas.
To register a new handset, proceed as fol-
lows:
1. Press and hold the „MT-Search“-button
, located at the underside of the
base, for approximately 5 seconds.
2. Press the key “Menu” and select the
entry “Registration” with .
3. Now press “Select”.
4. With select the preferred base and
confirm with “Select”. The base station is
now located and the handset is registe-
red.
5. Now enter the PIN code (default is
0000).
6. If the PIN code is accepted, a log-on
tone sounds and the base assigns a
number to the handset. If the PIN code is
incorrect, a warning tone sounds and the
40 English
