![HumanTechnik freeTel eco Скачать руководство пользователя страница 37](http://html.mh-extra.com/html/humantechnik/freetel-eco/freetel-eco_operating-manual_2183429037.webp)
Setting the basis dial mode
1. Press the “Menu” key and select the
entry “BS Settings” with .
2. Now press “Select”.
3. With the key, scroll to “Dial Mode” and
press “Select”.
4. Now select the preferred dial mode and
complete the setting with “Save”.
Setting the flash time
1. Press the “Menu” key and select the
entry “BS Settings” with .
2. Now press “Select”.
3. Select “Flash Time” and confirm with
“Select”.
4. With , you can select between Flash-1
(100ms) and Flash-2 (300ms), and con-
firm with “Save”.
Reset base settings
1. Press the “Menu” key and select the
entry “BS Settings” with .
2. Now press “Select”.
3. Select “Reset” and confirm with “Select”.
4. Now enter your PIN code and confirm
with “Reset”.
Telephone settings (HS)
Setting the alarm
With the handset, you can set an alarm with
a snooze function.
1. Press the “Menu” key and select the
entry “HS Settings” with .
2. Now press “Select”.
3. Select “Alarm” and confirm with “Select”.
4. Select “On” and confirm with “Select”.
5. Enter the preferred alarm time and con-
firm with “Next”.
6. Turn the snooze function on or off, and
complete the procedure with “Save”.
An alarm clock symbol is shown in the
display when the alarm is enabled.
7. When the alarm sounds, you can turn it
off by pressing any key. If you have ena-
bled “snooze”, the alarm will sound again
after 10 minutes until you turn the alarm
off again.
Turning off the alarm
1. Press the “Menu” key and select the
entry “HS Settings” with .
2. Now press “Select”.
3. Select “Alarm” and confirm with “Select”.
4. Select “Off” and confirm with “Select”.
Audio settings
You can pre-set the volume of the receiver
and speaker.
Setting the loudspeaker volume
1. Press the “Menu” key and select the
entry “HS Settings” with .
2. Now press “Select”.
3. Select “Audio Setup” and confirm with
“Select”.
4. Select “Speaker V.” and press “Select”.
5. Now enter the preferred level 1 to 5 and
complete the procedure with “Save”.
Setting the earpiece volume
1. Press the “Menu” key and select the
entry “HS Settings” with .
2. Now press “Select”.
3. Select “Audio Setup” and confirm with
“Select”.
4. Select “Earpiece V.” and press “Select”.
5. Now enter the preferred level 1 to 5 and
complete the procedure with “Save”.
English 37