Delete the last dialled telephone number
1. The last dialled telephone number is
displayed by pressing
.
2. With you can select the last dialled
numbers.
3. Press “More” and select “Delete” to de-
lete this entry or “Delete All” to delete all
entries.
4. The telephone asks for confirmation.
Press “OK” to end the procedure.
Adjusting the receiver volume / high / low
setting
The receiver volume can be adjusted du-
ring a telephone call using the keys
or
, which are on the left of the telephone.
Additional amplification can be turned on
with the
key. When additional amplifi
-
cation is enabled, a receiver volume of up to
30 dB is reached. When the amplification is
enabled, the red amplifier display at the top
of the telephone lights up. Additional amp
-
lification is turned off by pressing the
key again.
You can adjust the tone with
.
Press the
key and set the preferred
tone from 1 to 3.
Note:
The tone control can only be adjusted during
a call.
Using the telephone with a hearing aid
You can use your telephone with hearing
aids that are fitted with a telephone coil (T-
coil). To do this, set the selector switch on
your hearing aid to the “S” or “HS” position.
Please ensure that the telephone receiver is
held as closely as possible to your hearing
aid.
Mute
You can temporarily turn off the microphone
on your telephone during a call so that your
conversation partner cannot hear you.
During the call, “Call Muted” appears on the
lower-right edge of the display screen. The
mute function is enabled by pressing the
right control key. Pressing it again disables
the function.
Flash key
This function is needed to enable certain T-
Net features.
During the call, “Flash” appears on the
lower-right edge of the display screen. By
pressing the left control key, the telephone
line is interrupted for a defined period of time
(100ms / 120ms / 300ms / 600ms) (“Setting
the flash time”).
Searching for the handset
If you have misplaced the handset, you can
search for it using the handset search key
underneath the base.
1 Briefly press the search key
The registered handset starts ringing for
about 60 seconds.
2. Press the search key
again to end
the search procedure.
English 33
