Setting the number of cycles
A cycle is defined as dialing all the programmed SOS phone numbers in one
consecutive sequence. By setting the number of cycles you will define how
frequently the phone numbers are to be dialed.
1. Press the button and then the button.
2. Enter the four-digit device PIN "
XXXX
" (the telephone's default PIN code
is "
0000
").
3. Enter the code "
350
".
4. Enter the number of cycles using the number keys 1-8.
If you press 9, the telephone will keep transmitting the SOS call until it is
answered.
5. Press the button to save the changes.
6. Re-enter a code or press the button to exit the Settings menu.
Note:
the telephone's default is 3 cycles.
P
P
P
*
Pause after an unsuccessful cycle
You can specify the pause (1-9 minutes) between the end of an unsuccessful
cycle and the start of a new cycle.
1. Press the button and then the button.
2. Enter the four-digit device PIN "
XXXX
" (the telephone's default PIN code
is "
0000
").
3. Enter the code "
351
".
P
*
58 English
