36 English
Meeting "around" a table
1. Set your hearing aid to "T" or "MT" in order to transmit sound information directly to
the T-coil in your hearing aid via the teleloop, or connect a headset to a CM-1 receiver.
2. Slide the mode selector switch to the Zoom position.
3. Position your CM-1 transmitter as close as possible to the speaker, whereby the
device's microphone unit should be pointing as directly as possible towards the
speaker.
4. Switch the CM-1 transmitter and CM-1 receiver on at the on/off switch.
5. Adjust the speech volume to a comfortable level by setting the volume controller on
your CM-1 receiver to an appropriate level.
➔
You are taking part in the meeting shown.
➔
The other people are speaking at different
levels.
➔
Use the "Zoom" transmission mode to reduce
disruptive sounds from behind perceptibly and,
at the same time, to amplify speech in front of
you.
