No. Control feature Function and application CM-1 transmitter
English 31
7
Frequency
There is a slide switch on the back of the device for setting
selector switch
the following 3 frequency ranges:
Switch
A
863,725 MHz
setting
B
864,225 MHz
C
864,725 MHz
Slide the selector switch to the required frequency position using
the supplied pin.
Bear in mind at all times that the CM-1 transmitter and the CM-1
receiver have to be set to the same frequency ranges.
Different frequency ranges prevent each transmission.
8
Battery compart- The battery compartment is located on the back of the device
ment cover
and holds both batteries.
9
Recording
Insert the knob of the pendant cord into the circular part of the
device
device and engage the knob perceptibly by pushing it towards
pendant cord
he tip of the device.
Inserting the batteries into the CM-1 transmitter:
The device runs on two rechargeable "AAA"-type batteries. It can also run on non-
rechargeable batteries.
Where necessary, only use original replacement batteries.
If you run your CM-1 communication system on disposable batteries, don't place the
transmitter onto the CM charger.
