38 English
Enjoying music or TV programmes
There is an audio input jack on the CM-1 transmitter which you can connect directly to
your television or music system using the supplied audio cable.
How to connect a device:
1. Switch off the CM-1 transmitter and the CM-1 receiver.
2. Set the volume control on the CM-1 receiver to a low value.
3. Insert the two cinch plugs (Ø 3.5mm) into the audio input jack of the CM-1 trans-
mitter.
4. Insert the other two cinch plugs into the audio output jack of your television or music
system.
5. Switch the CM-1 transmitter and the CM-1 receiver back on.
6. Adjust the transmission volume to a comfortable level.
Changing the transmission frequency
If you experience transmission interference, this may be due to the fact that there are
two CM-1 systems being operated in close proximity to one another.
The CM-1 transmitter and CM-1 receiver are capable of communicating in three different
frequency ranges. The frequency ranges are characterized by the letters "A“, "B“ and "C“
and apply to transmitters and receivers alike.
Bear in mind at all times that the CM-1 transmitter and the CM-1
receiver have to be set to the same frequency ranges. Discrepancy in
frequency ranges will prevent any transmission.
1. Switch off the CM-1 transmitter and the CM-1 receiver.
2. Open the battery compartment on your CM-1 receiver and take out the battery.
3. Use the supplied pin to adjust the frequency selector switch inside the battery
compartment.
4. Re-insert the battery and place the cover on the battery compartment.
5. Turn the CM-1 transmitter around so that it is facing away from you.
6. Use the supplied pin to adjust the frequency selector switch on the back of the
CM-1 transmitter to the same value that you had previously selected for your
CM-1 receiver.
7. Switch the CM-1 transmitter and the CM-1 receiver back on.
!
