Arm Mount Con gurations
STEP 1
Locate the mounting hole for the Post at the rear
of the work surface. Mount the Post by using the
Lock Washer and the M12 Phillips screw.
Slide the Cable Management Clips over the Post
and squeeze them to lock at the location of your
choice.
CAUTION: It is important to use the Lock Washer
and place it between the bottom of the Post and
the work surface.
STEP 2
Open the lever on the side of the Monitor Arm
Bracket. Slide it over the Pole to the location of
your choice. Close the lever to secure the bracket
on the Post.
Adjust the Smart Stop Rotation Ring to set
rotational stop if required. To select the
appropriate orientation of the ring, read the
rotation angles marked on the ring.
Options:
- 360 degree rotation
- 180 degree rotation
- 90 degree rotation
8
