Post Mount Con gurations
STEP 1
Locate the mounting hole for the Post at the rear
of the work surface. Mount the Post by using the
Lock Washer and the M12 Phillips screw.
Slide the Cable Management Clips over the Post
and squeeze them to lock at the location of your
choice.
CAUTION: It is important to use the Lock Washer
and place it between the bottom of the Post and
the work surface.
STEP 2
Attach the VESA Plate (Post Mount) to the rear of
your technology device (e.g. Tablet Holder or
similar) using the four M4 Phillips screws.
6
