Human HumaStar 300, Руководство по обслуживанию

Страница: 288 / 405

gerätename | User manual
270
to perform checks:
All checks can be easily performed without a problem, however, special attenti-
on is needed when checking and/or activating the peristaltic pumps .
In order not to create malfunctions when activating the pumps, proceed as fol-
lows:.
- Position the Sampling Arm
above the WaSHing Well (WaSH)
, if necessary
activate command [arm on Wash] .
- To expel the wash solution, activate pump p7 in the Cuvette Measurement
System [Pump P7 ON].
1. [Test Pump P1]: Pump P1 will operate for about 2 seconds. The pump will ex-
pel via the Probe the quantity of liquid it aspirated from the WASHING well.
to Check the iSe Module (optional)
In this section there are some controls to clean the electrodes, as follows:
1. [iSe mod. on line] : checks the communication between the PC Master and
the ISE Module.
2. [iSe Maintenance] - [iSe puRge] : the electrodes are washed with Calibrator
A.
3. [iSe Clean] : the electrodes are cleaned with the “Clean” solution present on
the Sample Tray.
This operation has to be done every time there are problems in Calibrating the
ISE Module. If problems persist in Calibration, see „21 Optional Modules“, de-
tailed description of the
iSe module.
18.2.3 ReaCtion and MeaSuReMent SySteM CHeCkS
During Analyzer initialization, the first seven checks are automatically perfor-
med, including
[Read all filters]
. The remaining checks can be requested by the
operator or when necessary in case of a malfunction in the System with a WaR-
ning
Š
.
to perform checks:
All checks can be easily performed without a problem, however, special attenti-
on is needed when checking and/or activating some of the parts .
at the end of testing –
disactivate pump p7 -
[pump p7 off]