Human HumaStar 300, Руководство по обслуживанию

Страница: 34 / 405

gerätename | User manual
16
2.6.3 HydRauliC ConneCtionS
Connect as „Figure 7“, Waste container, Wash Solution, Liquid for incubation
bath.
WaSH Solution: Fill container with 5 liters of dist. water and add 3 drops of
tween 20 . Mix slowly by inverting to avoid foaming. Close the container with
its screw cap containing e level sensor. It will be flagged when the solution level
in the container gets low, however, there will be enough solution to finish the
programmed workload. It is suggested to prepare the Wash Solution fresh every
day and add to the container as necessary.
a) Once a week it is suggested to rinse thoroughly the Wash Container with
distilled water before adding the freshly prepared Wash Solution.
inCubation batH - Fill the container with bi-distilled water and close it with its
screw cap and its level sensor.
a) When the Analyzer is turned ON, the incubation bath will be automatically
filled including its thermostat. Both the temperature and the level of liquid
in the incubation bath are continuously monitored. Missing bi-distilled wa-
ter in the bath is automatically signaled and flagged.
b) To avoid formation of bacteria or other undesirable matter inside the water
bath, it is important that every two weeks this bi-distilled water be drained
and fresh one introduced. This operation is done automatically through the
Maintenance program. Simply press first Empty and then Fill Bath. ,
note: use only bi-di-
stilled water for the in-
cubation bath.
figuRe 7
Hydraulic Connections