HULTDINS SuperSaw 651S, Руководство по установке

Страница: 26 / 34

I N I T I A L U PS TA R T
26 SuperSaw 651S en011106b_ss651.FM
Bleeding the chain tension system
1. Lower the grapple saw to the ground and shut off the
engine.
2. Tip the unit backwards if possible so that the bleeder
valve (1) is as high as possible in relation to the
tension pistons.
3. Open the bleeder valve (1) 1 - 2 turns with the Key,
P/N 0696011 (2).
4. Retract the bar holder (3) completely, using the
retraction tool P/N 0696116, and close the bleeder
valve (1) with the bar holder (4) in the inner position.
5. Start the engine and activate the saw function 4-5
times.
6. Repeat step 1- 4.
7. Repeat this process after 30-60 minutes of operation.
Important!
Always bleed the system if there is any suspicion of
air having entered the system, e.g. after replacing a
hose or other component.
ill. 25 Bleeding the chain tension system
1 Bleeder valve
2 Key, P/N 0696011
3 Bar holder
4 Retraction tool, P/N 0696116
3 1
2 4