HULTDINS SuperSaw 651S, Руководство по установке

Страница: 15 / 34

TE C H N I C A L D A TA
En011104c_ss651.fm SuperSaw 651S 15
Technical data
Special tools
The following special tools are supplied with the unit and
required when servicing the grapple saw.
Air pump
The air-pump is used when adjusting the saw bar
retraction speed.
Installation tool
The installation tool, P/N 0690149, is required when
replacing the check valve for the chain tensioning.
Check valve key
The key, P/N 0696011, is used when
replacing the check valve for the chain lubrication. It is
also used when bleeding the chain tensioning circuit.
Pressure gauge hose
The pressure gauge hose, P/N 0724042, is used to connect
a pressure gauge to the pressure test points.
ill. 7 Air-pump, P/N 0138042
ill. 8 Installation tool, P/N 0690149
ill. 9 Key, P/N 0696011
ill. 10 Pressure gauge hose, P/N 0724042