HULTDINS SuperSaw 651S, Руководство по установке

Страница: 21 / 34

I N S TA L L A T I O N
en011106a_0726113.fm SuperSaw 21
4. Install the rotator onto the rotator bracket
Tighten the fasteners according to the following
chart.
Size Torque
M16 320 Nm
M20 620 Nm
Hydraulic installation
1. Connect the saw motor pressure line to port “1” on
the rotator.
2. Connect the saw motor return line to port “2” on the
rotator.
3. Connect the saw motor drain line to the rod side of
the grapple cylinder with a T-adapter.
4. Connect the hoses from the grapple cylinder to the
connections at the bottom of the rotator.
5. Start the machine and make sure that all hydraulic
pressures are correct, adjust if necessary.
6. Test all functions to make sure that everything is
working properly.
ill. 18 Install the rotator onto the rotator bracket
ill. 19 Hydraulic installation
“2”
“1”
Return
Pressure
Drain line