Hughes Thuraya IP+, Руководство пользователя, Страница: 37 / 61

Thuraya IP+ Satellite Modem User Guide
29
3500799-0001 rev C
is only a relative measure of the satellite signal strength and may vary
from location to location.
Exit pointing: Select this button to leave the screen after optimum signal
strength has been achieved. This action will take you to the home
screen on the wMMI.
Status: Status codes (see page 36 for a list).
R
EMOTE
A
CCESS
S
CREEN
The Remote Access screen enables wMMI access from the satellite
network side of the terminal. To use the feature, select the Enabled
option, type in a password and select Save . Obtain the network IP
address from the Properties screen and use that in the browser on the
remote PC as follows: http://85.115.79.53:45380 (85.115.79.53 is an
example; your terminal address will be different and can change with
each PDP session). In general the IP address to use is
http://aaa.bbb.ccc.ddd:45380 , where aaa.bbb.ccc.ddd is the
terminal’s public IP address and the HTTP access port is 45380. You will be
prompted to enter Remote Access password to log in. For security
reasons you should use the Logout button on the wMMI when you have
finished the session.

Only one remote access session is supported at any one time

The Thuraya IP+ must have an active PDP context

The remote access password can be changed by entering a
new string using the remote access screen password entry above

The remote access feature is disabled by default
Thuraya IP+ Satellite Modem User Guide
15
3500799-0001 rev C
 Software version currently executing
 Public network IP address

Private local IP address (Ethernet subnet and wMMI address)

WLAN local IP address (WLAN subnet)

Access Point Name (APN) for the satellite connection

Modem International Mobile Equipment Identity (IMEI)
 SIM International Mobile Subscriber Identity ( IMSI)
 Ethernet and WLAN Media Access Control (MAC) addresses
S
TATISTICS
S
CREEN
The Statistics Screen provides you with an estimate of your data usage.
Data usage figures are obtained by counting the bytes in the IP packets
received by and sent from the Thuraya IP+ terminal. You can view both
“since power on” (per session) and “cumulative” (lifetime) data usage
counts. To reset the data counters of a session, simply select the Reset
button for either transmit or receive and click the Apply button.
Note : The data usage figures provided on the screen are
estimates only. This feature is not tied into the actual billing
system. Hughes assumes no liability if differences are found
between data usage figures and your actual bill.
Thuraya IP+ Satellite Modem User Guide
15
3500799-0001 rev C
 Software version currently executing
 Public network IP address

Private local IP address (Ethernet subnet and wMMI address)

WLAN local IP address (WLAN subnet)

Access Point Name (APN) for the satellite connection

Modem International Mobile Equipment Identity (IMEI)
 SIM International Mobile Subscriber Identity ( IMSI)
 Ethernet and WLAN Media Access Control (MAC) addresses
S
TATISTICS
S
CREEN
The Statistics Screen provides you with an estimate of your data usage.
Data usage figures are obtained by counting the bytes in the IP packets
received by and sent from the Thuraya IP+ terminal. You can view both
“since power on” (per session) and “cumulative” (lifetime) data usage
counts. To reset the data counters of a session, simply select the Reset
button for either transmit or receive and click the Apply button.
Note : The data usage figures provided on the screen are
estimates only. This feature is not tied into the actual billing
system. Hughes assumes no liability if differences are found
between data usage figures and your actual bill.