Hughes Thuraya IP+, Руководство пользователя, Страница: 34 / 61

26
Thuraya IP+ Satellite Modem User Guide
3500799-0001 rev C
MAC filtering: Enable or disable MAC filtering. If filtering is enabled , you
can enter up to eight MAC addresses. Only these addresses will be
permitted to access the terminal via the WLAN.
A
DVANCED
S
ETTINGS
S
CREEN
The Advanced Settings Screen allows you to modify several key
operating parameters in the unit.
Satellite search method:
Normal is the default method to use unless your
service provider specifies the full method. The full method takes longer
and utilizes more resources since it will search all possible frequencies for
Thuraya IP+ service. This full search can take up to 20 minutes.
Auto power ON: When enabled , the terminal will automatically power
up when external DC is applied.
Buffering: When buffering is enabled the Thuraya IP+
can store more data
to handle bursts of IP traffic from connected devices. When buffering is
disabled, only the minimum of traffic is stored to reduce latency. Disable
buffering for low latency traffic, such as voice or video.
Antenna pointing: This drop-down menu determines whether the pointing
display comes up each time Thuraya IP+ is powered-up or restarts. The
factory default for this setting is Disabled to bypass the pointing state upon
power-up. However, antenna pointing can be enabled to provide
pointing information prior to going online.
Thuraya IP+ Satellite Modem User Guide
15
3500799-0001 rev C

Software version currently executing
 Public network IP address

Private local IP address (Ethernet subnet and wMMI address)

WLAN local IP address (WLAN subnet)

Access Point Name (APN) for the satellite connection

Modem International Mobile Equipment Identity (IMEI)
 SIM International Mobile Subscriber Identity ( IMSI)

Ethernet and WLAN Media Access Control (MAC) addresses
S
TATISTICS
S
CREEN
The Statistics Screen provides you with an estimate of your data usage.
Data usage figures are obtained by counting the bytes in the IP packets
received by and sent from the Thuraya IP+ terminal. You can view both
“since power on” (per session) and “cumulative” (lifetime) data usage
counts. To reset the data counters of a session, simply select the Reset
button for either transmit or receive and click the Apply button.
Note : The data usage figures provided on the screen are
estimates only. This feature is not tied into the actual billing
system. Hughes assumes no liability if differences are found
between data usage figures and your actual bill.
Thuraya IP+ Satellite Modem User Guide
15
3500799-0001 rev C

Software version currently executing
 Public network IP address

Private local IP address (Ethernet subnet and wMMI address)

WLAN local IP address (WLAN subnet)

Access Point Name (APN) for the satellite connection

Modem International Mobile Equipment Identity (IMEI)
 SIM International Mobile Subscriber Identity ( IMSI)

Ethernet and WLAN Media Access Control (MAC) addresses
S
TATISTICS
S
CREEN
The Statistics Screen provides you with an estimate of your data usage.
Data usage figures are obtained by counting the bytes in the IP packets
received by and sent from the Thuraya IP+ terminal. You can view both
“since power on” (per session) and “cumulative” (lifetime) data usage
counts. To reset the data counters of a session, simply select the Reset
button for either transmit or receive and click the Apply button.
Note : The data usage figures provided on the screen are
estimates only. This feature is not tied into the actual billing
system. Hughes assumes no liability if differences are found
between data usage figures and your actual bill.