Hughes Thuraya IP+, Руководство пользователя

Страница: 28 / 61

20
Thuraya IP+ Satellite Modem User Guide
3500799-0001 rev C
Static DNS host: If this button is selected , the modem uses the DNS
address you enter in the DNS address field. You should check this
box and enter an IP address only if directed to do so by your
service provider.
DMZ host: If you wish to route incoming network originated IP traffic to a
specific connected device, enter that device’s IP address in this
parameter. Be careful to establish a suitable firewall on this device to
protect against malicious attacks from the Internet.
Configure Port Forwarding: This link opens the Port Forwarding
configuration page. See below for details.
APN selection: If use of multiple Internet service providers is required, you
can modify the current APN value. You should modify these fields only if
directed to do so by your service provider. The choices are the following:
Streaming-CBR , Refill, <BLANK> (enter the desired name), and Disabled.
SAVE/CANCEL: If you want the values you have entered to be
processed, click the SAVE button, exit the wMMI, and reboot your
computer. You will also need to turn Thuraya IP+ off and then on again
so that the new settings can take effect. If you want the values you have
entered to be ignored, click the CANCEL button and the network
settings remain as they were with no reboot required.
P
ORT
F
ORWARDING
C
ONFIGURATION
Port Forwarding is a technique that allows specific global ports to be
connected to specific local device(s). This feature allows incoming IP
Thuraya IP+ Satellite Modem User Guide
15
3500799-0001 rev C

Software version currently executing
 Public network IP address

Private local IP address (Ethernet subnet and wMMI address)

WLAN local IP address (WLAN subnet)

Access Point Name (APN) for the satellite connection

Modem International Mobile Equipment Identity (IMEI)
 SIM International Mobile Subscriber Identity ( IMSI)

Ethernet and WLAN Media Access Control (MAC) addresses
S
TATISTICS
S
CREEN
The Statistics Screen provides you with an estimate of your data usage.
Data usage figures are obtained by counting the bytes in the IP packets
received by and sent from the Thuraya IP+ terminal. You can view both
“since power on” (per session) and “cumulative” (lifetime) data usage
counts. To reset the data counters of a session, simply select the Reset
button for either transmit or receive and click the Apply button.
Note : The data usage figures provided on the screen are
estimates only. This feature is not tied into the actual billing
system. Hughes assumes no liability if differences are found
between data usage figures and your actual bill.
Thuraya IP+ Satellite Modem User Guide
15
3500799-0001 rev C

Software version currently executing
 Public network IP address

Private local IP address (Ethernet subnet and wMMI address)

WLAN local IP address (WLAN subnet)

Access Point Name (APN) for the satellite connection

Modem International Mobile Equipment Identity (IMEI)
 SIM International Mobile Subscriber Identity ( IMSI)

Ethernet and WLAN Media Access Control (MAC) addresses
S
TATISTICS
S
CREEN
The Statistics Screen provides you with an estimate of your data usage.
Data usage figures are obtained by counting the bytes in the IP packets
received by and sent from the Thuraya IP+ terminal. You can view both
“since power on” (per session) and “cumulative” (lifetime) data usage
counts. To reset the data counters of a session, simply select the Reset
button for either transmit or receive and click the Apply button.
Note : The data usage figures provided on the screen are
estimates only. This feature is not tied into the actual billing
system. Hughes assumes no liability if differences are found
between data usage figures and your actual bill.